AUTONET TV

A Clean Sweep (Fuel Injector Cleaning)

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine.

But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine. 

One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to.

If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system.

A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance.  An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. 

When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Refresh Your Brakes (Brake Fluid Exchange)

Brakes are one of your vehicle's most important safety components, and you may have noticed that they don't stop as surely as they used to.  Maybe it takes you applying a little more pressure to them than before, or perhaps you get the feeling that they're not stopping you as quickly.

Those could be signs that your brake fluid needs changing.  Hydraulic brake systems use a fluid that enables the brakes to apply their stopping power to the wheels.  That fluid can wear out, degrade, become contaminated or pick up air and moisture.  All those can eventually contribute to brakes that feel sluggish. Driving with old, worn-out brake fluid may also shorten the lifespan of other braking components.

Our technicians can evaluate your brake fluid to see if it needs changing. Your vehicle's manufacturer recommends how often that should be done, and when it needs changing may depend on how and where you drive. Our technicians can check the condition of your brake fluid when you have your regular oil changes. 

A technician will remove the old fluid and replace it with the type the vehicle manufacturer recommends. They will also bleed the air from the brake system, check it for any leaks and inspect other components such as the hoses, rotors and brake pads. Because brake fluid is combustible and toxic, it's important that it be disposed of properly so as not to create environmental damage. 

And just a reminder that if you continue to drive with old, contaminated brake fluid that's past its lifespan, other components of your brake system can fail.  Let's face it. Brakes that don't stop you when you need them can endanger your life—and the lives of those near your vehicle.   

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Staying In Charge (Alternator Repair)

Seems like these days, we're hearing about more and more electric or hybrid vehicles.  Keep in mind that conventional gasoline internal combustion vehicles have important electrical components, too, and it's important to make sure they're operating at their peak.

In a vehicle with a gasoline engine, the part that keeps the battery charged is the alternator.  It converts the mechanical energy created by the engine into electrical power.  To do that, a shaft in the alternator has a pulley on one end that's driven by a belt that is turned by the engine.  A series of magnets then spins around coiled wires and it creates alternating current, or electricity. Your vehicle uses that to charge the battery that, in turn, keeps other electrical components in your vehicle working.

Here are a few signs that the alternator isn't doing its job right.  The battery keeps going dead, your instrument panel's battery light is on (it looks like a rectangle with a - and + inside and a couple of "terminals" on top), or your lights are dimmer than they usually are. You may also have a voltage gauge that shows  lower than usual power. If bearings in your alternator are seizing up, you may hear a grinding noise coming from your engine compartment. If you have any of those signs, bring your vehicle to us so we can check your electrical system.

A technician will run diagnostics on your alternator, the cables and the battery. Because the alternator is driven by a belt, the technician will check what shape all the drive belts are in.  Plus, we'll see how much electricity the alternator is putting out. 

If your alternator has failed, it can be replaced with a new or a remanufactured one. Speak with your service advisor about which will best suit your needs. Oh, and keep in mind that sometimes other parts may have to be replaced at the same time. For example, if your alternator's bearings froze up, that may have damaged the drive belt, and it may have to be replaced at the same time. 

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940