AUTONET TV

The Part You've Never Seen (Flat Tires and Solutions)

They say your vehicle has one, but you've never seen it.  And you might not even know it if you stumbled on it accidentally.

We're talking about the jack, that tool that allows you to lift one corner of the vehicle up so someone can change a flat tire.

So you say you'd never try to change a flat anyway, so you don't care where it is.  But one day, you may find yourself in a spot where you're stranded with no cell service and you'll need to at least know the basics of what to do.

Well, here's the ironic part.  Many of today's vehicles don't even have jacks and spares!  Recently, manufacturers have been saving weight by supplying another solution for a flat tire, such as an inflator kit that has a tire sealant in it, or a small compressor.  If your vehicle has one of those, it's a good idea to get to know how to use it before you need to use it.  Hopefully you'll be able to call roadside assistance and they can take care of things, but circumstances may prevent help from coming for a long time. The next time you're here at AutoSurgeonInc for routine maintenance, ask one of our pros to show you the basics of your vehicle's flat tire tools.  Consider watching an online video, too; there are plenty out there and may be specific to your make and model.

Some vehicles have a space-saving spare, a smaller one that is meant to get you on the road long enough to find a place to have it repaired or replaced.  Those vehicles will also have a jack.  Then there are vehicles that have a full-size spare tire and a jack.  Again, you may prefer to call roadside assistance, but if no one is available or reachable (which is sometimes the case in a major storm), you may have to fix your own flat.

Some drivers do a "dry run" of changing a tire in their driveway during daylight hours so they at least know where the jack and spare are and how to use them.   Our service experts may be able to help you locate each part and give you some tips.  And again, there are many videos online that can show you the fundamentals of jacking your make and model of vehicle. 

Nobody relishes a flat tire.  You may be lucky and never have to change one.  But in this case, a little knowledge is better than no knowledge at all.  In the unlikely case you are stranded at the side of a highway at night in the middle of the rain with no cell service, you'll at least be one step ahead.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

The New Blade in Town

If your windshield wipers are streaking and chattering when you turn them on in the rain or snow, it's time for a little "blade renewal." And when it comes to new wiper blades, there are some new designs that are worth a look.

One of the latest is called the beam blade.  It's different than conventional blades you might be used to.  Instead of a metal frame and a rubber blade that slides in the frame on a track, the beam blades have an enclosed spring-steel band that allows the rubber wiper to conform to the windshield glass shape much more tightly. 

There are some key advantages to beam blades, which is why many vehicle manufacturers are making them standard on their latest models.  For one thing, they work well in all weather conditions, including the heat of summer and the icy, snowy cold of winter.  Since there is no separate frame, snow and ice can't form in gaps like conventional wipers and prevent the blade from clearing your windshield. 

Many beam blades also have a mini "wing" on them. It uses the air moving over your windshield to create a little extra downward pressure that presses the blade even more tightly against the glass.  The faster you go, the more firmly the blade can sweep off moisture. That means a clearer view. 

Beam blades are an upgrade that can add to your vehicle's overall safety with that increased visibility.  The best thing is to discuss wiper blades with your service advisor to see if it's a good choice for you and your vehicle, keeping in mind the type of driving you do and the climate you live in.  Remember that when it comes to wipers, it's important that you are using blades that are designed to fit your vehicle and that they are installed correctly. 

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Losing Your Spark (Spark Plug Replacement)

When's the last time you thought about spark plugs? You probably don't remember.  That's because spark plugs usually last a long time and don't need much attention.  But they don't last forever, and when they start going bad, they'll send you a few clues.

• Vehicle is hard to start. 
• Fuel economy is going down
• Acceleration isn't what it used to be
• Engine runs roughly
• Check Engine light is on

There are many things that can cause those symptoms, so it's wise to head on over to your vehicle repair facility to have them look over your vehicle.  But the problem could be your spark plugs. They do wear out, not producing a strong enough spark to ignite your fuel the way they're designed to.  A closely related problem is failing spark plug wires, and a technician will test for both possibilities… and more. 

Your vehicle's manufacturer recommends changing wires and/or plugs at certain intervals.  Spark plugs are made out of different materials and some last far longer than others.  Ask your service advisor to let you know when yours should be changed.  Badly misfiring plugs can cause expensive damage to a vehicle's catalytic converter, so it's best to take care of them before that happens.  Replacing your spark plugs and/or wires is money well spent to have your vehicle running smoothly, dependably and efficiently.  

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Give it the Boot (Ball Joint Boot Replacement)

Your vehicle may be wearing boots right now and you might not even know it.  They're called ball joint boots.  They're actually protective, flexible things that protect parts of your suspension (called ball joints) from all the hazards the road can fling at them.  If one of those ball joint boots fails and you don't get it replaced, the ball joints themselves could wind up failing, a repair that can be even more expensive. 

Ball joint boots not only keep things like rocks, salt, water and dirt out of your ball joints, they also help the ball joints keep their lubrication inside and working properly.  To do that, the boots have to be made of a flexible material, sometimes rubber, sometimes a synthetic.  They do take a beating, exposed to temperature extremes and debris, and eventually they can tear or crack just because of their age.  Unless someone is keeping an eye on your ball joint boots, you may never know there's a problem.  That's why when you regularly take your vehicle in to a repair facility for other things like oil changes and routine maintenance, a technician will inspect the ball joint boots to make sure they're still in top shape.

If they're not, your service advisor will let you know. Take care of that soon and you may avoid having to replace the ball joints themselves or other suspension parts which may be much more expensive.  Often it's best to replace boots on both sides of the vehicle since they frequently wear at about the same rate. 

If you want to make a fashion statement, some ball joint boots come in various colors other than run-of-the-mill black.  And some aftermarket boots are made of a more durable material than the original equipment that came on your vehicle.  Some drivers get a real "kick" out of flashy ball joint boots!

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940