AUTONET TV

Straight to the Point (Alignment Signs of Problems)

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems.

• Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out.
• Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician.
• Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or right.  But if you find yourself constantly correcting course to keep your vehicle headed straight down the road, that’s worth having us look at your alignment.
• You’re going through tires like there’s no tomorrow. The tread on your tires should be wearing nice and evenly from the outside to the inside of the tire.  If the wear isn’t even, it could be your vehicle needs an alignment.

We have equipment designed to quickly and accurately measure your vehicle’s alignment.  We can make precise adjustments to make sure you are headed straight where you want to go.  Have your alignment checked regularly. It can help prevent more serious problems in the future and make your vehicle drive as beautifully as you remember it used to.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. 

That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles.

The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).  After a lot of wear, tear, bumps, road hazards, heat, and you name it, the rubber rips and the lubrication leaks out.  At that point, it must be replaced. 

Here are signs to tell if your CV joint is bad.

• Your vehicle is pulling to one side as a wheel loses power or you feel a vibration while driving.
• You see grease on the inside or edge of your tires.  
• Your front tires won’t point in the same direction.
• You hear grinding or clicking when you turn.

Sometimes if a broken boot early is caught early, a technician can pack in new grease and replace just the boot.  But if the lubrication has leaked out and the joint is already wearing badly, the CV and boot both have to be replaced.  Give your vehicle the boot (as in a new boot) and CV joint, and you’ll be back on the road to your next destination.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

In That Case? (Transfer Case Exchange)

Ever wonder how all-wheel-drive or 4-wheel-drive vehicles get the power from the engine to the front and rear wheels? The magic happens in what's called a transfer case.  In some all-wheel-drive vehicles, it's sometime called a power take-off unit, or PTU.

Inside the transfer case is a set of gears.  And to keep those gears meshing smoothly, they have to be lubricated and kept cool.  What does that is called transfer case fluid. Depending on your vehicle's type of transfer case, it is filled with either an automatic transmission fluid, a gear oil that's a bit thicker or transfer case fluid designed to be use for your transfer case.

As happens with all lubricating fluids, the transfer case fluid has things in it that break down the older they get.  They have corrosion inhibitors, detergents and anti-foaming agents that keep the lubricant from getting air bubbles in it. Transfer cases don't have filters in them to clean out impurities.

If you don't have your transfer case fluid exchanged for fresh, you risk damage to the case, and that can run into thousands of dollars.  So the wise driver makes sure the fluid is changed according to the manufacturer's recommendations.  For many vehicles, that is every 30,000 mi/50,000 km, but some require it more frequently.   Your vehicle service facility can advise you on what your vehicle's optimal interval is.

During the fluid exchange, any metal filings that may have come off are cleaned off of the drain and fill plugs that are usually magnetized to catch the stray metal pieces.

If you hear grinding noises coming from under your vehicle or if it is having trouble shifting gears or going in and out of 4-wheel-drive, those could be signs your transfer case needs service. In that case, have our technicians check it out.  The best plan of action?  Keep your transfer case fluid maintained and it should keep you heading down the road for years to come.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940

Bad Vibrations (Brake Rotor Replacement)

If you’ve ever stepped on your brake pedal and felt your vehicle vibrate, that’s a signal that you shouldn’t ignore.  A pulsating brake pedal is a sign that something is wrong.  Braking action should be smooth, sure, and quiet, not shaky and noisy.

Most newer vehicles have disc brakes, called that because they have a round, flat disc connected to each wheel.  Those discs are the rotors. Other parts called brake pads are squeezed against those discs when you press on the brake pedal.

Remember that vibration we mentioned? That can be caused by the rotor not having a straight, true surface. Rotors can heat up from friction and warp.  They can become thinner from constant wear.  Rotors can rust from the elements they’re exposed to, such as rain, snow ice, and salt.  They can get grooves in them from so many contacts with the pads. 

The signs of worn rotors are vibrations, grooves on the rotor (which you can see sometimes through open spots in the wheel) noise such as squealing or scraping when you brake, and increased stopping distance.   

While it used to be common for rotors to be machined (shaved down to restore their flat surface), newer vehicles have thinner rotors, so your service adviser may suggest you replace rotors when they start showing signs of significant wear.

Brakes are important safety equipment for every vehicle.  They enhance your control while driving, so it’s important that they be regularly inspected and maintained.  A good time is when you have your tires rotated. A technician can then look at all components of your brakes and recommend any service you may need to keep your brakes in top shape.

AutoSurgeonInc
1820 E Kalamazoo St
Lansing, Michigan 48912
517-374-8940